Skip to content

Request response🔗

Introduction🔗

This example demonstrates how to use iceoryx in a client-server architecture using the request-response communication pattern. The client sends a request with two consecutive fibonacci numbers and the server responds with the next number in the sequence.

We provide three examples, the very basic typed and untyped examples and the most natural setup combining a server with a Listener and a client using a WaitSet. Since you can find the general setup and functionality of the client and the server also in the Listener/WaitSet example, we will describe only this one.

Expected output🔗

asciicast

Code walkthrough🔗

In the following scenario the client (client_cxx_waitset.cpp) uses the WaitSet to wait for a response from the server (server_cxx_listener.cpp). The server uses the Listener API to take and process the requests from the client.

The client is inspired by the iox-cpp-waitset-basic example from the WaitSet example and the server from the iox-cpp-callbacks-subscriber in the Listener example.

This is the most recommended way to create an efficient client-server combination with iceoryx.

Client using WaitSet🔗

At first, the includes for the client port, request-response types, WaitSet, and runtime are needed.

#include "request_and_response_types.hpp"

#include "iceoryx_hoofs/posix_wrapper/signal_watcher.hpp"
#include "iceoryx_posh/popo/client.hpp"
#include "iceoryx_posh/popo/wait_set.hpp"
#include "iceoryx_posh/runtime/posh_runtime.hpp"

Afterwards we prepare some ContextData where we can store the Fibonacci numbers and the sequence ids that we use to ensure the correct ordering of the responses.

struct ContextData
{
    uint64_t fibonacciLast = 0;
    uint64_t fibonacciCurrent = 1;
    int64_t requestSequenceId = 0;
    int64_t expectedResponseSequenceId = requestSequenceId;
};

Next, the iceoryx runtime is initialized. With this call, the application will be registered at RouDi, the routing and discovery daemon.

iox::runtime::PoshRuntime::initRuntime(APP_NAME);

After creating the runtime, the client is created and attached to the WaitSet. The options can be used to alter the behavior of the client, like setting the response queue capacity or blocking behavior when the response queue is full or the server is too slow. The ClientOptions are similar to PublisherOptions/SubscriberOptions.

iox::popo::WaitSet<> waitset;

iox::popo::ClientOptions options;
options.responseQueueCapacity = 2U;
iox::popo::Client<AddRequest, AddResponse> client({"Example", "Request-Response", "Add"}, options);

// attach client to waitset
waitset.attachState(client, iox::popo::ClientState::HAS_RESPONSE).or_else([](auto) {
    std::cerr << "failed to attach client" << std::endl;
    std::exit(EXIT_FAILURE);
});

Since the client requests the sum of two numbers from the server, we provide the structs AddRequest and AddResponse as template parameters. When the sum is received, it is re-used as the addend of the next request to send. This calculates a Fibonacci sequence.

struct AddRequest
{
    uint64_t augend{0};
    uint64_t addend{0};
};
struct AddResponse
{
    uint64_t sum{0};
};

In the main loop, the client prepares first a request using the loan() API. The request is a sample consisting of the two numbers augend and addend that the server shall sum up. Additionally, the sample is marked with a sequence id that is incremented before every send cycle to ensure a correct ordering of the messages. The request is transmitted to the server via the send() API.

client.loan()
    .and_then([&](auto& request) {
        request.getRequestHeader().setSequenceId(ctx.requestSequenceId);
        ctx.expectedResponseSequenceId = ctx.requestSequenceId;
        ctx.requestSequenceId += 1;
        request->augend = ctx.fibonacciLast;
        request->addend = ctx.fibonacciCurrent;
        std::cout << APP_NAME << " Send Request: " << ctx.fibonacciLast << " + " << ctx.fibonacciCurrent
                  << std::endl;
        request.send().or_else(
            [&](auto& error) { std::cout << "Could not send Request! Error: " << error << std::endl; });
    })
    .or_else([](auto& error) { std::cout << "Could not allocate Request! Error: " << error << std::endl; });

Once the request has been sent, we block and wait for samples to arrive. Then we iterate over the notification vector to check if we were triggered from our client:

auto notificationVector = waitset.timedWait(iox::units::Duration::fromSeconds(5));

for (auto& notification : notificationVector)
{
    if (notification->doesOriginateFrom(&client))
    {
        // ...
    }
}

The client receives the responses from the server using take() and extracts the sequence id with response.getResponseHeader().getSequenceId(). When the server response comes in the correct order, the received sum is stored in the ContextData struct ctx for usage in the next request.

while (client.take().and_then([&](const auto& response) {
    auto receivedSequenceId = response.getResponseHeader().getSequenceId();
    if (receivedSequenceId == ctx.expectedResponseSequenceId)
    {
        ctx.fibonacciLast = ctx.fibonacciCurrent;
        ctx.fibonacciCurrent = response->sum;
        std::cout << APP_NAME << " Got Response : " << ctx.fibonacciCurrent << std::endl;
    }
    else
    {
        std::cout << "Got Response with outdated sequence ID! Expected = "
                  << ctx.expectedResponseSequenceId << "; Actual = " << receivedSequenceId
                  << "! -> skip" << std::endl;
    }
}))
{
}

Server using Listener🔗

At first, the includes for the server port, Listener, request-response types and runtime are needed.

#include "request_and_response_types.hpp"

#include "iceoryx_hoofs/posix_wrapper/signal_watcher.hpp"
#include "iceoryx_posh/popo/listener.hpp"
#include "iceoryx_posh/popo/server.hpp"
#include "iceoryx_posh/runtime/posh_runtime.hpp"

Then a callback is created that shall be called when the server receives a request. In this case the calculation and the sending of the response is done in the Listener callback. If there are more resource-consuming tasks, this could also be outsourced with a thread pool to handle the requests.

void onRequestReceived(iox::popo::Server<AddRequest, AddResponse>* server)
{
    while (server->take().and_then([&](const auto& request) {
        std::cout << APP_NAME << " Got Request: " << request->augend << " + " << request->addend << std::endl;

        server->loan(request)
            .and_then([&](auto& response) {
                response->sum = request->augend + request->addend;
                std::cout << APP_NAME << " Send Response: " << response->sum << std::endl;
                response.send().or_else(
                    [&](auto& error) { std::cout << "Could not send Response! Error: " << error << std::endl; });
            })
            .or_else([](auto& error) { std::cout << "Could not allocate Response! Error: " << error << std::endl; });
    }))
    {
    }
}

The server provides the take() method for receiving requests and the loan() and send() methods for sending the responses with the sum of the two numbers.

Next, the iceoryx runtime is initialized.

iox::runtime::PoshRuntime::initRuntime(APP_NAME);

After creating the runtime, the server port is created based on a ServiceDescription. Similar to the client, the options are used to alter the behavior of the server, like setting the request queue capacity or blocking behavior when the request queue is full or the client is too slow.

iox::popo::ServerOptions options;
options.requestQueueCapacity = 10U;
iox::popo::Server<AddRequest, AddResponse> server({"Example", "Request-Response", "Add"}, options);

Now we want to listen to an incoming server event and call the previously created callback whenever a request has been received. This is done with the following call:

listener
    .attachEvent(
        server, iox::popo::ServerEvent::REQUEST_RECEIVED, iox::popo::createNotificationCallback(onRequestReceived))
    .or_else([](auto) {
        std::cerr << "unable to attach server" << std::endl;
        std::exit(EXIT_FAILURE);
    });

With that the preparation is done and the main thread can just sleep or do other things:

iox::posix::waitForTerminationRequest();

Once the user wants to shutdown the server, the server event is detached from the listener:

listener.detachEvent(server, iox::popo::ServerEvent::REQUEST_RECEIVED);

Check out request_response on GitHub